Execute Assignment Via Customer Login - Siemens SINUMERIK 840Di sl Commissioning Manual

License management
17.2 Assigning via Web License Manager
5. After completing the assignment process, enter the License Key displayed on the Web
6. Confirm the entry of the new License Key by pressing the softkey: "Transfer".
17.2.2

Execute assignment via customer login

Background
For the customer login, log on to a computer (PC/PG) connected to the Internet with the user
name and password in the Web License Manager. All licenses released for this user name in
the framework of the license management may then be assigned to a piece of hardware.
After completing the assignment process, the new License Key is displayed. This must then
be entered in the licensing dialog of the HMI components used.
Requirements
The following prerequisites must be met in order to assign a license to a piece of hardware
via customer login and HMI user interface:
● The HMI component is connected with the control system (NCU) on which the license
● A computer (PC/PG) with Internet connection and browser is available.
● The login data for the customer login is available:
Implementation
Assigning a license to a piece of hardware:
1. Determine the HW serial number and the product name (HMI Advanced/HMI Embedded:
Note
Ensure that the hardware serial number displayed is also really the one you want to make
the assignment for. The assignment of a license to a piece of hardware cannot be
reversed via the Web License Manager.
572
License Manager into the licensing dialog of the HMI user interface.
HMI Advanced/HMI Embedded:
Operating-area switchover: Commissioning > Key: etc. (">") > Licenses > Overview
should be assigned. Both components have been booted.
– User name
– Password
"Type of hardware") via the HMI Licensing dialog box.
HMI Advanced/HMI Embedded:
Operating-area switchover: Commissioning > Key: etc. (">") > Licenses > Overview
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
Manual