Display Function - Siemens SINUMERIK 840Di sl Commissioning Manual

14.6.5

Display function

If you press the Display softkey after the set measurement time has expired and the
measurement results have been prepared automatically, you can call the graphical display
function of the measurement results.
Figure 14-10 Measurement results: Trace function
Softkeys: X-marker on, Y marker on
The X marker on and Y marker on sofkeys are used to display a vertical or horizontal red line
with a red circle on the measuring curve in the diagrams.
The associated values, e.g. for damping, frequency, degrees, etc. are displayed in the
appropriate diagram.
Use the cursor keys to move the markers:
● Slow: Cursor key
● Fast: Shift key + cursor key
Manual
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
Drive Optimization with HMI Advanced
14.6 Trace function
531