Axis Monitoring - Siemens SINUMERIK 840Di sl Commissioning Manual

Setting data
Table 11-36 Velocities: Setting data
Number Name
General ($SN_ ...)
41100 JOG_REV_IS_ACTIVE
41110 JOG_SET_VELO
41120 JOG_REV_SET_VELO
41130 JOG_ROT_AX_SET_VELO
41200 JOG_SPIND_SET_VELO
References:
/FB/ Function Manual - Basic Functions; G2 Velocities, Setpoint/Actual Value Systems,
Control, Section "Velocities, Traversing Ranges, Accuracies"
/FB/ Function Manual - Extended Functions, H1 Manual and Handwheel Travel
11.5.18

Axis monitoring

Static monitoring functions
The static monitoring functions with reference to a machine axis are:
Exact stop coarse
Window around the setpoint position within which exact stop coarse is detected.
● MD36000 $MA_STOP_LIMIT_COARSE (exact stop coarse)
● IS DB31,... DBX60.6 (position reached with exact stop coarse)
Exact stop fine
Window around the setpoint position within which exact stop fine is detected.
● MD36010 $MA_STOP_LIMIT_FINE (exact stop fine)
● IS DB31,... DBX60.7 (position reached with exact stop coarse)
Delay time exact stop fine
Delay time after which the actual value must have reached the tolerance window "Exact stop
fine" when the setpoint position is reached.
● MD36020 $MA_POSITIONING_TIME (delay time exact stop fine)
● Alarm "25080 Positioning monitoring" and follow-up mode.
Manual
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
NC Commissioning with HMI Advanced
Name/remarks
Revolutional feedrate in JOG mode active
JOG velocity for linear axes (for G94)
JOG velocity (for G95)
JOG velocity for rotary axes
JOG velocity for the spindle
11.5 Axes and spindles
423