Siemens SINUMERIK 840Di sl Commissioning Manual page 279

Module: standard, extended
The module transfers the data for the "Standard" and "Additional I/Os" functions:
● Input data: 13 bytes
● Output data: 10 bytes
Standard Data
Low-Byte
Module: standard, handwheel, extended
The module transfers the data for the "Standard", "Handwheel" and "Additional I/Os"
functions:
● Input data: 17 bytes
● Output data: 10 bytes
Standard Data
Low-Byte
Setting the I/O addresses
The input/output addresses are assigned automatically by STEP 7 while inserting a module
in Slot 1 of the MCP 483 DP slave.
Double clicking with the left mouse button on a slot opens the "Properties - DP slave" dialog
box. This dialog box can be used to set the start addresses of the I/O data of the slot.
Manual
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
Customer LEDs
Reserved
(8 bytes) (1 byte)
Customer LEDs
Reserved
(8 bytes) (1 byte)
(1 byte)
High-Byte
(1 byte)
High-Byte
PROFIBUS DP Communication
8.7 DP slave MCP 483
279