Siemens SINUMERIK 840Di sl Commissioning Manual page 116

Configuration
3.3 Connection overview
1. Connectors:
2. Connectors:
3. Connectors:
4. The cable is included in the scope of supply
5. Cables: 6FX8002-2CP00-1A⃞0
6. The detailed connection overview for ADI4 is given in:
7. Connection with the help of Fast Connect (insulation displacement method) see:
8. Can be parameterized alternatively as MPI or PROFIBUS interface.
116
6ES7972-0BA41-0XA0; cable outlet 35
6ES7972-0BB41-0XA0; cable outlet 35
6ES7972-0BA12-0XA0; cable outlet 90
6ES7972-0BB12-0XA0; cable outlet 90
Cables:
6XV1830-0EH10; by the meter, non-trailable
6XV1830-3EH10; by the meter, trailable
6GK1500-0EA02; cable outlet 180
Cables:
6XV1830-0EH10; by the meter, non-trailable
6XV1830-3EH10; by the meter, trailable
6ES7972-0BB41-0XA0; cable outlet 35
6ES7972-0BB12-0XA0; cable outlet 90
Cables:
6XV1830-0EH10; by the meter, non-trailable
6XV1830-3EH10; by the meter, trailable
for an overview of the standard PC interfaces see Section "PCU 50.3" (Page 114) as well
as:
References:
/BH/ Operator components Manual, Component PCU 50.3
References:
/ADI4/ analog drive interface for 4 axes, connection overview
References:
SIMATIC Manual: Diagnostic repeater for PROFIBUS DP
Only the PLC can access this PROFIBUS interface. No drives and no NCK I/Os can be
operated via this PROFIBUS line.
, without PC socket connector
0
, with PC socket connector
0
, without PG socket connector
0
, with PG socket connector
0
, without PG-socket connector
0
, with PC socket connector
0
, with PG socket connector
0
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
Manual