Control Unit: Output "Infeed Ready For Activation" (Bico Interconnection) Signal - Siemens SINUMERIK 840Di sl Commissioning Manual

9.2.11

Control Unit: Output "Infeed ready for activation" (BICO interconnection) signal

To output the "Infeed ready to start" signal at terminal X132.8 of the Control Unit, parameter:
"r899, Bit 0" of the infeed must be connected to parameter: "p743" of the Control Unit via
BICO interconnection and terminal X132.8 of the control unit must be parameterized as
DO13 output:
● Infeed: r899 Bit 0: Ready to power up
● Control Unit: p743, BI: CU signal source for terminal DI/DO 13
Implementation
Perform the following actions:
1. To open the terminal configuration in the project navigator double-click on. Project > Drive
2. In the "Bidirectional digital inputs/outputs" tab (1), change the status for terminal X132.8
3. Click the binector input icon of terminal X132.8, DO13 (3) and select the signal: Infeed
Manual
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
unit_Adr10 > Control Unit > Inputs/outputs.
to "Output" (2)
"r899: Bit0, ... Infeed ready to start" (4).
Drive commissioning (SINAMICS)
9.2 ONLINE commissioning
327