15.2.2
HMI Advanced (option).
The creation of a series startup file with HMI Advanced is divided into the following steps:
1. Open the menu to create a series-commissioning file:
2. Selection of components to be backed up (see screen: Archive content)
3. Assignment of a filename (see screen: Archive name)
4. Setting of the series startup file via the vertical "Archive" softkey. The series startup file is
Figure 15-1
Manual
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
Operating range switchover > Services > ETC key ">" > Series startup > Startup archive
stored in the archive directory on the hard disk of the PCU.
Menu: Creating a series startup archive
User data backup/Series commissioning
15.2 Creating a series commissioning file
545