Siemens SINUMERIK 840Di sl Commissioning Manual page 562

Software installation/update and data backup
16.4 Restoring the as-delivered state
1. Proceed with all other (existing) directories according to Point 3:
● D:\SETUP\APPS\001\001 to \xxx
1. Proceed with all other (existing) directories according to Point 2:
● D:\SETUP\APPS\002 to \xxx
Once all the installation programs have been executed in the described sequence, partitions
C:, E:, and F: of the PCU hard disk are once again restored to their as delivered state.
Example
The following figure shows an example of a directory structure under directory
D:\SETUP\APPS with 2 applications and the resulting installation sequence. The first
application contains 3, the second application 2 installation programs.
Figure 16-4
562
Then following the installation instructions shown.
NOTICE
If you are prompted to reboot during installation, always confirm this with "Yes" and
reboot.
Installation sequence
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
Manual