Inserting The 840Di Sl Rack - Siemens SINUMERIK 840Di sl Commissioning Manual

PLC commissioning
6.3 Creating a SIMATIC S7 project
6.3.4

Inserting the 840Di sl Rack

The 840Di sl rack contains the already partially preconfigured components:
● SINUMERIK 840Di sl PLC
● MPI/DP interface
● PROFIBUS DP interface
● SINUMERIK 840Di sl NC
● SINUMERIK CP for Industrial Ethernet TCP/IP
Inserting the 840Di sl Rack
The 840Di sl Rack is located in the hardware catalog under:
Profile: Standard
SIMATIC 300 > SINUMERIK > 840Di sl > 840Di sl
Right-click to select the 840Di sl Rack and drag it to the Station window, while holding down
the mouse button. When you release the mouse button, the 840Di sl Rack will be inserted in
the S7 project.
Figure 6-5 HW Config: SINUMERIK 840Di sl Rack
164
Default designation: PLC 317-2DP 2AJ10
Default designation: MPI/DP
Default designation: DP
Default designation: NCK 840D sl
Default designation: CP 840D sl
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
Manual