License Management; Basic Principles; Important Terms - Siemens SINUMERIK 840Di sl Commissioning Manual

License management

17.1

Basic principles

17.1.1

Important terms

The terms below are important for understanding the license management of SINUMERIK
software products.
Term
Software product
Hardware
License
CoL
(Certificate of License)
license number
MCI board
Manual
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
Description
A software product is generally used to describe a product that is installed on a piece of
hardware to process data. Within the license management of SINUMERIK software products,
a corresponding license is required to use each software product.
Hardware in the framework of the license management of SINUMERIK software products is a
SINUMERIK control (CNC). With SINUMERIK 840Di sl represented by the appropriate MCI
board.
A license gives the user a legal right to use the software product. Evidence of this right is
provided by the following:
CoL (Certificate of License)
•
License key
•
The CoL is the proof of the license. The product may only be used by the holder of the license
or authorized persons. The CoL includes the following data relevant for the license
management:
Product name
•
license number
•
Delivery note number
•
Hardware serial number
•
Note:
The hardware serial number is located only on a CoL of the system software or if the license
was ordered bundled, in other words the system software came together with options.
The license number is the feature of a license that is used for its unique identification.
The MCI board represents, as the carrier of all the remanent data of a SINUMERIK solution
line control system, the identity of this control system. The MCI board includes the following
data relevant for the license management:
Hardware serial number
•
License information including the License Key
•
17
563