Siemens SINUMERIK 840Di sl Commissioning Manual page 209

Examples
Call of FC 26 for the first MCP, for the first mode group and the first channel of the NC.
BAGNo
ChanNo
Call of FC 26 for the second MCP, for the second data group and the third channel of the NC.
BAGNo
ChanNo
Manual
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
:= B#16#01 // 1. MCP, 1st mode group of the NC
:= B#16#01 // 1. Channel of NC
:= B#16#12 // 2. MCP, 2nd mode group of the NC
:= B#16#03 // 3. Channel of NC
Ethernet communication
7.6 HT 8
209