Installing The Screw-In Raid Controller Card - Huawei FusionServer Pro CH121 V5 V100R005 Maintenance And Service Manual

FusionServer Pro CH121 V5 Compute Node
Maintenance and Service Guide
Figure 4-6 Removing the screw-in RAID controller card
Step 11 Place the removed component in an ESD bag.
----End

4.3.4 Installing the Screw-in RAID Controller Card

Step 1 Power off the compute node.
For details, see
Step 2 Remove the compute node.
For details, see
Step 3 Place the compute node on the ESD workstation.
Step 4 Remove the cover.
For details, see
Step 5 Check whether a PCIe card is installed.
l
l
Step 6 Remove the PCIe card.
For details, see
Step 7 Take the spare part out of its ESD bag.
Step 8 Determine the position of the screw-in RAID controller card.
Issue 06 (2019-08-10)
3.1 Power-Off
3.3 Removing a CH121
3.5 Removing the
If yes, go to Step 6.
If no, go to Step 7.
3.11 Removing a PCIe
Copyright © Huawei Technologies Co., Ltd.
Procedure.
V5.
Cover.
Card.
4 Parts Replacement
58