Removing The Ultraslim Odd From The Ultraslim Odd Adapter - Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual

▶
"Installing the PCI air duct" on page
▶
"Installing the system air duct" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
12.7.2 Removing the ultraslim ODD from the ultraslim
ODD adapter
Upgrade and Repair Unit
(URU)
Tools: Phillips PH0 / (+) No. 0 screw driver
Preliminary steps
▶
"Removing backup and optical disk media" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
The front cover only needs to be removed in order to remove or
install accessible drive dummy covers.
▶
"Removing the system air duct" on page
▶
"Removing the PCI air duct" on page
▶ If applicable,
"Removing the riser module" on page
▶ If applicable, remove the expansion card, see
card" on page 358.
▶ Remove the fan bridge, see
▶ If applicable,
"Removing the 4x 3.5-inch HDD extension box" on page
TX2550 M5
89.
68.
68.
82.
83.
49.
88.
"Handling the fan bridge" on page
Upgrade and Maintenance Manual
Accessible drives
Hardware: 10 minutes
110.
50.
51.
67.
86.
"Removing an expansion
92.
281.
459