Installing The 4X 3.5-Inch Hdd Extension Box; Preliminary Steps; Removing Accessible Drive Dummy Covers; Installing The Ultraslim Odd Into The Hdd Extension Box - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

7.4.5

Installing the 4x 3.5-inch HDD extension box

Upgrade and Repair Unit
(URU)
Tools: Slotted screw driver (for bending in or out accessible drive mounting
brackets)
7.4.5.1

Preliminary steps

"Suspending BitLocker functionality" on page 111
Ê
"Shutting down the server" on page 58
Ê
"Disconnecting the power cord" on page 59
Ê
"Getting access to the component" on page 61
Ê
"Removing the system air duct" on page 91
Ê
"Removing the system fan holder" on page 93
Ê
7.4.5.2

Removing accessible drive dummy covers

Ê Remove accessible drive filler covers from the required bays as described
in section "Accessible drive filler covers" on page
Ê Remove accessible drive covers as described in section
covers" on page
7.4.5.3

Installing the ultraslim ODD into the HDD extension box

Ê If applicable, install the ultraslim ODD into the new 4x 3.5-inch HDD
extension box as described in section
page 418.
7.4.5.4

Installing the HDD backplane

Ê If applicable, install the HDD backplane on the 4x 3.5-inch HDD extension
box as described in section
page 255.
TX2560 M2 / RX2560 M2
Hard disk drive (HDD) / solid state drive (SSD)
106.
"Installing the new HDD backplane" on
Upgrade and Maintenance Manual
Hardware: 10 minutes
104.
"Installing the ultraslim ODD" on
"Accessible drive
247