Installing The New Hdd/Ssd Backplane; Concluding Steps - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state drive (SSD)
7.4.4.3

Installing the new HDD/SSD backplane

Figure 159: Installing the HDD/SSD backplane
Ê At a slight angle, fit the HDD/SSD backplane into the six recesses in the
HDD extension box (1).
Ê Fold down the HDD/SSD backplane (2).
Ê Fasten the HDD/SSD backplane with four screws (see figure 157).
Ê Install the 8x 2.5-inch HDD extension box as described in section
the 8x 2.5-inch HDD extension box" on page
7.4.4.4

Concluding steps

"Installing the system fan holder" on page 94
Ê
"Installing the system air duct" on page 92
Ê
"Reassembling" on page 74
Ê
Ê Reinstall all HDDs into their original slots in the HDD extension box as
described in section
"Connecting the power cord" on page 87
Ê
"Switching on the server" on page 90
Ê
246
"Installing 2.5-inch HDD/SSD modules" on page
Upgrade and Maintenance Manual
238.
TX2560 M2 / RX2560 M2
"Installing
173.