Table of Contents
Advertisement
Liftgate Service Hole
If other liftgate opening methods are invalid,
the liftgate can be opened for service as per
the following steps:
1. Fold the rear seat backrests, and get to the
trunk.
2. Open the trim cover outside the liftgate
lock, as shown in the figure above.
3. Insert a very small straight screwdriver
into the rightmost end of the slot and
move the lever in the slot leftward. The
liftgate is opened when an unlock sound is
heard.
Caution
If the operation is correct, but the liftgate
cannot be opened and closed normally
with qualified conditions to open and
c l o s e t h e e l e c t r i c l i f t g a t e , i t i s
recommended to drive to the nearest
Aftersales Service Center for repair.
Passive Entry Passive Start (PEPS)
System
*
High-configured models are equipped with
PEPS system. You can lock or unlock the
doors conveniently only by taking the remote
control key with you and getting to the certain
ranges of the front doors or liftgate. You can
lock or unlock remotely without taking your
key out from your pocket.
KEYS, DOORS AND WINDOWS
Passive Entry
When the doors are locked and the ignition
switch is at LOCK position, bring a legal key
and get close to the front door handle (within
1.2 m); press the button on the handle, and the
system will certify with the key. Once certified
successfully, the system will unlock all doors.
The hazard warning lamp flashes once.
21
Advertisement
Table of Contents
