Correct Operation - Siare Falco 101 User Manual

1.4

Correct operation

For correct and complete operation, the Falco 101 must be:

correctly connected to the patient circuit;

connected to a mains power supply with the same voltage as specified on the
identification plate (or supplied by internal battery);

correctly connected to all accessories and equipment necessary for the operation of the
lung ventilator;

if requested, connected O
The Falco 101 incorporates a series of sensors for continuous patient monitoring, the most
important of which are:

the inspiration line flow sensor (internal) measures the volumes set for the patient.

the pressure sensors (internal), used to control the pressure of the airways or of the
medical gases;

the oxygen sensor (external-optional), used to measure the concentration of oxygen in
the gas inspired by the patient.
1-4
inlet at low pressure.
2
The connections with main power supply, as well as connections with
medical gas distribution system at low pressure must be effected
according to the indications contained in the present user's manual (see
on chapter 2).
User Manual, DU3111103