Preface - Siemens SIMATIC ET 200S Manual

Preface

1.1 Preface
Purpose of the manual
This manual supplements the
Functions which apply to the ET 200S in general are described in the ET 200S operating
instructions on the Internet (https://support.automation.siemens.com/WW/view/en/1144348).
The information in this document along with the operating instructions enables you to
commission the ET 200S.
Basic knowledge requirements
To understand these operating instructions you should have general knowledge of
automation engineering.
Scope of validity of the manual
This manual applies to this ET 200S module. It describes the components that are valid at
the time of publication.
Recycling and disposal
Due to the fact that it is low in contaminants, this ET 200S module is recyclable. For
environmentally compliant recycling and disposal of your electronic waste, please contact a
company certified for the disposal of electronic waste.
Additional support
If you have any questions relating to the use of the products described in this manual and do
not find the answers in this document, please contact your local Siemens representative or
office nearest to you on the Internet (https://www.automation.siemens.com/partner/).
A guide to the technical documentation for the various SIMATIC products and systems is
available on the Internet. (https://www.siemens.com/simatic-tech-doku-portal)
The online catalog and ordering system are available on the Internet
(https://www.siemens.com/automation/mall).
Training center
We offer courses to help you get started with the ET 200S and the SIMATIC S7 automation
system. Please contact your regional training center or the central training center in D-
90327, Nuremberg, Germany on the Internet (https://www.siemens.com/sitrain).
4
ET 200S Distributed I/O System
Digital Electronic Module 2RO NO/NC DC24..48V/5A AC24..230V/5A (6ES7132-4HB13-0AB0)
Operating Instructions.
Manual, 08/2019, A5E48281338-AA
1