Mitsubishi Electric Q Series Programming Manual page 97

3 COMMON PARAMETERS
POINT
GOT is recognized as an intelligent function modules "16 points 10 slots" on the
base (number of extension bases and slot No. are set in the GOT parameter.) for
bus connection with GOT.
Set the one extension base (16 points 10 slots) for connection with GOT, then set
"10 slots" as number of extension bases for connection with GOT in the Basic
Setting (base setting) of MT Developer2.
<Example>
When the "2nd stage" of extension base is set as connection with GOT.
(Set "10 Slots/GOT(Bus connection)" as "2nd stage" of extension base in
the base setting.)
3 - 10