Intelligent Function Modules Controlled By Motion Cpu - Mitsubishi Electric Q Series Programming Manual

4 AUXILIARY AND APPLIED FUNCTIONS

4.17 Intelligent Function Modules Controlled by Motion CPU

Table 4.1 Intelligent function modules controlled by Motion CPU list
Module name Model name
Q68ADV
Q62AD-DGH
Q66AD-DG
Analogue input
Q68ADI
module
Q64AD
Q64AD-GH
Q68AD-G
Q68DAVN
Q68DAIN
Analogue output Q62DAN
module Q62DA-FG
Q64DAN
Q66DA-G
Analogue input/output
Q64AD2DA
module
QD62D
High-speed counter
Ver.!
module
QD65PD2
QD75P1
QD75P2
QD75P4
QD75D1
Positioning module
QD75D2
Ver.!
QD75D4
QD75MH1
QD75MH2
QD75MH4
QD77MS2
Simple Motion module
QD77MS4
Ver.!
QD77MS16
Control unit of UQ1-01
displacement sensor
UQ1-02
Ver.!
(Note-1): Number of I/O points is total of "Built-in interface in Motion CPU (Input 4 points) + I/O module + intelligent function module".
The Motion CPU can be used as the control CPU of intelligent function modules
(excluding some modules).
Up to 4 intelligent function modules in total can be used.
The intelligent function modules that can be controlled by the Motion CPU are shown
in Table 4.1.
Number of
points
16 points
Total 4 modules
(256 points or less
32 points
Ver.! : Refer to Section 1.5 for the software version that supports this function.
Number of usable modules
Q173DSCPU/ Q173DCPU(-S1)/
Q172DSCPU Q172DCPU(-S1)
Total 4 modules
(256 points or less)
(Note-1)
)
4 - 101
Cannot use coincidence detection
interrupt function.
Cannot use coincidence detection
interrupt function and periodic interrupt
function.
—
Manufactured by Optex FA Co., LTD.
Cannot use dedicated setting
software.
Remark