Mitsubishi Electric Q Series Programming Manual page 82

2 MULTIPLE CPU SYSTEM
• CPU No.1 (PLC CPU) (GX Works2/GX Developer
Set the device transmitted to CPU No.2.
Set the device received from CPU No.2.
(Note) : The operating example of Multiple CPU high speed refresh function is shown in "(b) Operation example".
(2) Operation example of Multiple CPU high speed refresh function
(a) Parameter setting
The automatic refresh setting of Multiple CPU high speed refresh is shown
below.
) <Screen: GX Works2>
• CPU No.2 (Motion CPU) (MT Developer2)
Set the device received from CPU No.1.
Set the device transmitted to CPU No.1.
Set the device to executed the Multiple CPU high speed refresh.
2 - 31