Mitsubishi Electric Q Series Programming Manual page 75

2 MULTIPLE CPU SYSTEM
• CPU No.1 (PLC CPU) (GX Works2/GX Developer)
Set the device transmitted to CPU No.2.
Set the device received from CPU No.2.
POINT
The processing performance of automatic refresh improves when devices are
transmitted in 2 word sets. Therefore, it is recommended to set the start device as 2
word unit by inputting an even device number.
1) Operation example of automatic refresh
a) 2 CPU modules (1 PLC CPU, 1 Motion CPU) use
• Parameter setting
The setting example of automatic refresh is shown below.
<Screen: GX Works2>
(Note) : The operation example of automatic refresh is shown on the next page.
• CPU No.2 (Motion CPU) (MT Developer2)
Set the device received from CPU No.1.
Set the device transmitted to CPU No.1.
2 - 24