4 AUXILIARY AND APPLIED FUNCTIONS
4.6 All Clear Function
This function is used to clear the all user data, password setting, device memory,
backup area and user data area of FLASH ROM in the Motion CPU module.
(1) Procedure for clear all
(a) Set the Motion CPU module to installation mode (Set a rotary switch 1
(SW1) to "A".)
(b) Execute the all clear.
Select the menu bar [Online]-[Clear CPU Memory].
Refer to the help of MT Developer2 for details of the operation procedure.
(1) Set the Motion CPU module to installation mode to clear all.
Be sure to set a rotary switch after power supply OFF.
(2) The user data area of FLASH ROM built-in Motion CPU module is also
(3) All user data and password setting are cleared at the "Clear all".
It is recommended to be backup them in advance using MT Developer2.
(4) When all clear is executed for user data created by the operating system
software type "SV22" of Q173DSCPU/Q172DSCPU, the operation method
becomes "virtual mode switching method".
4 - 43