Mitsubishi Electric Q Series Programming Manual page 184

4 AUXILIARY AND APPLIED FUNCTIONS
The Find CPU function can be used for specifying the IP address for Motion CPU side in
the connection via HUB.
This function can be activated in [Find CPU (Built-in Ethernet port) on Network] of CPU
side I/F Detailed Setting of PLC Module screen, finds the Motion CPU connected to the
same HUB as MT Developer2, and displays a list. Select the connecting Motion CPU
and click [Select IP Address Input] button to set the IP address for Motion CPU side.
• Set the label and comment of the Motion CPU in [CPU Name Setting] of Basic Setting.
The label and comment set in [CPU Name Setting] are displayed on the CPU side I/F
Detailed Setting of PLC Module screen.
POINT
Item
Label Enter a label (name and/or purpose) of the Motion CPU.
Comment Enter comments regarding the Motion CPU.
Description
4 - 69
Found Motion CPU
is displayed.
[Selection IP Address
Input] button
[Find CPU (Built-in
Ethernet port) on
Network] button
Setting range
Up to 10 characters
Up to 64 characters