ABB ACS850 Firmware Manual page 82

82 Parameters
No. Name/Value
10.07 Jog1 start
DI3
DI4
DI5
DI6
DIO4
DIO5
Const
Pointer
10.08 Jog2 start
DI3
DI4
DI5
DI6
DIO4
DIO5
Const
Pointer
10.09 Jog enable
DI3
DI4
DI5
Description
If enabled by parameter
for the activation of jogging function 1. (Jogging function 1
can also be activated through fieldbus regardless of
parameter 10.09.)
1 = Active.
See also other jogging function parameters:
10.09 Jog enable, 21.07 Speed ref
jog2, 22.10 Acc time jogging,
19.07 Zero speed delay.
Note: This parameter cannot be changed while the drive is
running.
Digital input DI3 (as indicated by
Digital input DI4 (as indicated by
Digital input DI5 (as indicated by
Digital input DI6 (as indicated by
Digital input/output DIO4 (as indicated by
bit 3).
Digital input/output DIO5 (as indicated by
bit 4).
Bit pointer setting (see Terms and abbreviations
If enabled by parameter
for the activation of jogging function 2. (Jogging function 2
can also be activated through fieldbus regardless of
parameter 10.09.)
1 = Active.
See also parameter 10.07 Jog1
Note: This parameter cannot be changed while the drive is
running.
Digital input DI3 (as indicated by
Digital input DI4 (as indicated by
Digital input DI5 (as indicated by
Digital input DI6 (as indicated by
Digital input/output DIO4 (as indicated by
bit 3).
Digital input/output DIO5 (as indicated by
bit 4).
Bit pointer setting (see Terms and abbreviations
Selects the source for enabling parameters
and 10.08 Jog2 start.
Note: Jogging can be enabled using this parameter only
when no start command from an external control location is
active. On the other hand, if jogging is already enabled, the
drive cannot be started from an external control location apart
from jog commands through fieldbus.
Digital input DI3 (as indicated by
Digital input DI4 (as indicated by
Digital input DI5 (as indicated by
10.09 Jog enable, selects the source
10.08 Jog2
jog1, 21.08 Speed ref
22.11 Dec time jogging
02.01 DI status, bit 2).
02.01 DI status, bit 3).
02.01 DI status, bit 4).
02.01 DI status, bit 5).
02.03 DIO
02.03 DIO
10.09 Jog enable, selects the source
start.
02.01 DI
status, bit 2).
02.01 DI status, bit 3).
02.01 DI status, bit 4).
02.01 DI status, bit 5).
02.03 DIO
02.03 DIO
10.07 Jog1 start
02.01 DI status, bit 2).
02.01 DI status, bit 3).
02.01 DI status, bit 4).
FbEq
start,
and
1073873409
1073938945
1074004481
1074070017
status, 1073938947
status, 1074004483
on page 63). -
1073873409
1073938945
1074004481
1074070017
status, 1073938947
status, 1074004483
on page 63). -
1073873409
1073938945
1074004481