Ext Io Conf; Hw Configuration - ABB ACS850 Firmware Manual

No. Name/Value
Auto falling
93.11 Enc2 pulse nr
0 ... 65535
93.12 Enc2 type
Quadrature
Single track
93.13 Enc2 sp CalcMode
A&B all
A all
A rising
A falling
Auto rising
Auto falling
94

94 Ext IO conf

94.01 Ext IO1 sel
None
FIO-01
FIO-11
FIO-21
94.02 Ext IO2 sel
None
FIO-01
FIO-11
FIO-21
95

95 Hw configuration

95.01 Ctrl boardSupply
Internal 24V
External 24V
Description
One of the above modes is selected automatically depending
on the TTL pulse frequency as follows:
Pulse frequency of the channel(s) Mode used
< 2442 Hz
2442...4884 Hz
> 4884 Hz
Defines the pulse number per revolution for encoder 2.
Number of pulses for encoder 2.
Selects the type of the encoder 2.
Quadrature encoder (has two TTL channels, channels A
and B)
Single track encoder (has one TTL channel, channel A)
Selects the speed calculation mode for encoder 2.
See parameter 93.03 Enc1 sp
See parameter 93.03 Enc1 sp
See parameter 93.03 Enc1 sp
See parameter 93.03 Enc1 sp
See parameter 93.03 Enc1 sp
See parameter 93.03 Enc1 sp
I/O extension configuration.
Activates an I/O extension installed into Slot 1.
No extension installed into Slot 1.
FIO-01 extension installed into Slot 1.
FIO-11 extension installed into Slot 1.
FIO-21 extension installed into Slot 1.
Activates an I/O extension installed into Slot 2.
No 2nd extension installed into Slot 2.
FIO-01 extension installed into Slot 2.
FIO-11 extension installed into Slot 2.
FIO-21 extension installed into Slot 2.
Diverse hardware-related settings.
Selects how the drive control unit is powered.
The drive control unit is powered from the drive power unit it
is mounted on. This is the default setting.
The drive control unit is powered from an external power
supply.
A&B all
A all
A falling
CalcMode.
CalcMode.
CalcMode.
CalcMode.
CalcMode.
CalcMode.
Parameters 197
FbEq
5
1 = 1
0
1
0
1
2
3
4
5
0
1
2
3
0
1
2
3
0
1