ABB ACS850 Firmware Manual page 68

68 Parameters
No. Name/Value
Bit Name
(continued)
9 Jogging 1
10 Jogging 2
11 Remote
cmd
12 Ramp out 0
13 Ramp hold
14 Ramp in 0
15 Ext1 / Ext2
16 Req startinh
17 Local ctl
18 FbLocal ref
19...27 Reserved
28 CW B28
29 CW B29
30 CW B30
31 CW B31
Description
Value Information
1 Activate Jogging 1. See section
0 Jogging 1 disabled.
1 Activate Jogging 2. See section
0 Jogging 2 disabled.
1 Fieldbus control enabled.
0 Fieldbus control disabled.
1 Force output of Ramp Function Generator to zero. The
drive ramps to a stop (current and DC voltage limits
are in force).
0 No action.
1 Halt ramping (Ramp Function Generator output held).
0 No action.
1 Force input of Ramp Function Generator to zero.
0 No action.
1 Switch to external control location EXT2.
0 Switch to external control location EXT1.
1 Activate start inhibit.
0 No start inhibit.
1 Request local control for Control Word. Used when the
drive is controlled from a PC tool or panel or local
fieldbus.
• Local fieldbus: Transfer to fieldbus local control
(control through fieldbus Control Word or
reference). Fieldbus steals the control.
• Panel or PC tool: Transfer to local control.
0 Request external control.
1 Request fieldbus local control.
0 No fieldbus local control.
Freely programmable control bits. See parameters
50.08...50.11 and the user manual of the fieldbus adapter.
FbEq
Jogging on page 32.
Jogging on page 32.
Log. Par.
OR 10.07
OR 10.08
– –
– –
– –
– –
OR 12.01
– –
– –
– –
– –