ABB ACS850 Firmware Manual page 80

80 Parameters
No. Name/Value
10.02 Ext1 start in1
DI1
DI6
DIO4
Timed func
Const
Pointer
10.03 Ext1 start in2
DI2
DI5
DIO5
Const
Pointer
10.04 Ext2 start func
Not sel
In1
3-wire
FBA
Description
Selects source 1 of start and stop commands for external
control location EXT1. See parameter
selections In1 and 3-wire.
Note: This parameter cannot be changed while the drive is
running.
Digital input DI1 (as indicated by
Digital input DI1 (as indicated by
Digital input/output DIO4 (as indicated by
bit 3).
Bit 4 of parameter 06.14 Timed func
at least one of the four timers configured in parameter group
36 Timed functions is on.
Constant and bit pointer settings (see
abbreviations on page 63).
Selects source 2 of start and stop commands for external
control location EXT1. See parameter
selection 3-wire.
Note: This parameter cannot be changed while the drive is
running.
Digital input DI2 (as indicated by
Digital input DI5 (as indicated by
Digital input/output DIO5 (as indicated by
bit 4).
Bit pointer setting (see Terms and abbreviations
Selects the source of start and stop commands for external
control location 2 (EXT2).
Note: This parameter cannot be changed while the drive is
running.
No start or stop command sources selected.
The source of the start and stop commands is selected by
parameter 10.05 Ext2 start
source bit are interpreted as follows:
State of source Command
(via par 10.05)
0 - > 1
Start
1 - > 0
Stop
The sources of the start and stop commands is selected by
parameters 10.05 Ext2 start in1
state transitions of the source bits are interpreted as follows:
State of source 1 State of source 2
(via par. 10.05) (via par. 10.06)
0 - > 1
1
1 - > 0
Any
Any 0
The start and stop commands are taken from the fieldbus.
10.01 Ext1 start
02.01 DI status, bit 0).
02.01 DI status, bit 5).
02.03 DIO
stat. The bit is on when
Terms and
10.01 Ext1 start
02.01 DI status, bit 1).
02.01 DI status, bit 4).
02.03 DIO
on page 63). -
in1. The state transitions of the
and 10.06 Ext2 start
Command
Start
Stop
Stop
FbEq
func,
1073742337
1074070017
status, 1073938947
1074005518
-
func,
1073807873
1074004481
status, 1074004483
0
1
2
in2. The
3