ABB ACS850 Firmware Manual page 83

No. Name/Value
DI6
DIO4
DIO5
DIO6
Const
Pointer
10.10 Fault reset sel
DI1
DI2
DI3
DI4
DI5
DI6
DIO4
DIO5
DIO6
Const
Pointer
10.11 Run enable
DI1
DI2
DI3
DI4
DI5
DI6
DIO4
DIO5
DIO6
Description
Digital input DI6 (as indicated by
Digital input/output DIO4 (as indicated by
bit 3).
Digital input/output DIO5 (as indicated by
bit 4).
Digital input/output DIO6 (as indicated by
bit 5).
Bit pointer setting (see Terms and abbreviations
Selects the source of the external fault reset signal. The
signal resets the drive after a fault trip if the cause of the fault
no longer exists.
0 -> 1 = Fault reset.
Digital input DI1 (as indicated by
Digital input DI2 (as indicated by
Digital input DI3 (as indicated by
Digital input DI4 (as indicated by
Digital input DI5 (as indicated by
Digital input DI6 (as indicated by
Digital input/output DIO4 (as indicated by
bit 3).
Digital input/output DIO5 (as indicated by
bit 4).
Digital input/output DIO6 (as indicated by
bit 5).
Bit pointer setting (see Terms and abbreviations
Selects the source of the external run enable signal. If the run
enable signal is switched off, the drive will not start, or coasts
to stop if running.
1 = Run enable.
Note: This parameter cannot be changed while the drive is
running.
Digital input DI1 (as indicated by
Digital input DI2 (as indicated by
Digital input DI3 (as indicated by
Digital input DI4 (as indicated by
Digital input DI5 (as indicated by
Digital input DI6 (as indicated by
Digital input/output DIO4 (as indicated by
bit 3).
Digital input/output DIO5 (as indicated by
bit 4).
Digital input/output DIO6 (as indicated by
bit 5).
02.01 DI status, bit 5).
02.03 DIO status,
02.03 DIO status,
02.03 DIO status,
on page 63). -
02.01 DI status, bit 0).
02.01 DI status, bit 1).
02.01 DI status, bit 2).
02.01 DI status, bit 3).
02.01 DI status, bit 4).
02.01 DI status, bit 5).
02.03 DIO status,
02.03 DIO status,
02.03 DIO status,
on page 63). -
02.01 DI status, bit 0).
02.01 DI status, bit 1).
02.01 DI status, bit 2).
02.01 DI status, bit 3).
02.01 DI status, bit 4).
02.01 DI status, bit 5).
02.03 DIO status,
02.03 DIO status,
02.03 DIO status,
Parameters 83
FbEq
1074070017
1073938947
1074004483
1074070019
1073742337
1073807873
1073873409
1073938945
1074004481
1074070017
1073938947
1074004483
1074070019
1073742337
1073807873
1073873409
1073938945
1074004481
1074070017
1073938947
1074004483
1074070019