ABB ACS850 Firmware Manual page 124

124 Parameters
No. Name/Value
Const
Pointer
21.05 Speed share
-8.000 ...8.000
21.07 Speed ref jog1
-30000 ... 30000
rpm
21.08 Speed ref jog2
-30000 ... 30000
rpm
21.09 SpeedRef min abs
20.01
Maximum speed
21.09
SpeedRef min abs
-(21.09
SpeedRef min
20.02
Minimum speed
0 ... 30000 rpm
21.10 Mot pot func
Reset
Store
21.11 Mot pot up
DI4
DI5
DI6
Const
Pointer
Description
Bit pointer setting (see
Defines the scaling factor for speed reference 1/2 (speed
reference 1 or 2 is multiplied by the defined value). Speed
reference 1 or 2 is selected by parameter
sel.
Speed reference scaling factor.
Defines the speed reference for jogging function 1. For more
information on jogging, see page 32.
Speed reference for jogging function 1.
Defines the speed reference for jogging function 2. For more
information on jogging, see page 32.
Speed reference for jogging function 2.
Defines the absolute minimum limit for the speed reference.
Limited speed reference
abs)
Absolute minimum limit for speed reference.
Selects whether the value of the motor potentiometer is
retained upon drive power-off.
Drive power-off resets the value of the motor potentiometer.
The value of the motor potentiometer is retained over drive
power-off.
Selects the source of motor potentiometer up signal.
Digital input DI4 (as indicated by
Digital input DI5 (as indicated by
Digital input DI6 (as indicated by
Bit pointer setting (see
Terms and abbreviations
21.04 Speed ref1/2
02.01 DI status, bit 3).
02.01 DI status, bit 4).
02.01 DI status, bit 5).
Terms and abbreviations
FbEq
on page 63). -
1000 = 1
1 = 1 rpm
1 = 1 rpm
Speed reference
1 = 1 rpm
0
1
1073938945
1074004481
1074070017
on page 63). -