Speed Calculation - ABB ACS850 Firmware Manual

No. Name/Value
16.11 User IO sel lo
Const
Pointer
16.12 User IO sel hi
Const
Pointer
16.14 Reset ChgParLog
Done
Reset
16.15 Menu set sel
No request
Load short
Load long
16.16 Menu set active
None
Short menu
Long menu
16.17 Power unit
kW
hp
19

19 Speed calculation

19.01 Speed scaling
0 ... 30000 rpm
19.02 Speed fb sel
Estimated
Description
When parameter 16.09 User set sel
the user parameter set together with parameter
sel hi. The status of the source defined by this parameter and
parameter 16.12 select the user parameter set as follows:
Status of source Status of source
defined by par. defined by par.
16.11 16.12
FALSE FALSE
TRUE FALSE
FALSE TRUE
TRUE TRUE
Bit pointer setting (see Terms and abbreviations
See parameter 16.11 User IO sel
Bit pointer setting (see Terms and abbreviations
Resets the log of latest parameter changes.
Reset not requested (normal operation).
Reset log of latest parameter changes. The value reverts
automatically to Done.
Loads a short, long or custom parameter list. By default, short
parameter list is displayed by drive.
No change has been requested.
Load short parameter list. Only a selective list of parameters
will be displayed.
Load long parameter list. All parameters will be displayed.
Shows which parameter list is active. See parameter
Menu set sel.
No parameter list is active.
Short parameter list is active.
Long parameter list is active. All parameters are displayed.
Selects the unit of power for parameters such as
inu out, 01.23 Motor power
Kilowatt.
Horsepower.
Speed feedback, speed window, etc. settings.
Defines the terminal speed value used in acceleration and the
initial speed value used in deceleration (see parameter group
22 Speed ref ramp). Also defines the rpm value that
corresponds to 20000 for fieldbus communication with ABB
Drives communication profile.
Acceleration/deceleration terminal/initial speed.
Selects the speed feedback value used in control.
A calculated speed estimate is used.
is set to IO mode, selects
16.12 User IO
User parameter
set selected
Set 1
Set 2
Set 3
Set 4
on page 63). -
lo.
on page 63). -
01.22 Power
and 99.10 Mot nom power.
Parameters 117
FbEq
0
1
0
1
2
16.15
0
1
2
0
1
1 = 1 rpm
0