ABB ACS850 Firmware Manual page 242

242 Fault tracing
Code Fault
(fieldbus code)
0309 APPL LOADING
(0x6300)
0310 USERSET LOAD
(0xFF69)
0311 USERSET SAVE
(0xFF69)
0312 UFF OVERSIZE
(0x6300)
0313 UFF EOF
(0x6300)
0314 TECH LIB
INTERFACE
(0x6100)
0315 RESTORE FILE
(0x630D)
0316 DAPS MISMATCH
(0x5484)
0317 SOLUTION FAULT
(0x6200)
0318 MENU HIDING
(0x6200)
Cause
Corrupted application file
Note: This fault cannot be
reset.
Loading of user set is not
successfully completed
because:
- requested user set does not
exist
- user set is not compatible
with drive program
- drive has been switched off
during loading.
User set is not saved because
of memory corruption.
UFF file is too big.
UFF file structure failure
Incompatible firmware
interface
Note: This fault cannot be
reset.
Restoration of backed-up
parameters failed.
Mismatch between JCU
Control Unit firmware and
power unit logic versions.
Fault generated by function
block SOLUTION_FAULT in
the solution program.
Menu hiding file missing or
corrupted.
What to do
Reload application.
If fault is still active, contact your local
ABB representative.
Reload.
Check the setting of parameter
boardSupply.
If the fault still occurs, contact your local
ABB representative.
Contact your local ABB representative.
Delete faulty file or contact your local
ABB representative.
Contact your local ABB representative.
Contact your local ABB representative.
Contact your local ABB representative.
Check the usage of the
SOLUTION_FAULT block in the solution
program.
Reload application.
Contact your local ABB representative.
95.01 Ctrl