ABB ACS850 Firmware Manual page 111

No. Name/Value
SpRef ramped
SpRef used
TorqRef used
Process act
Proc PID out
Pointer
15.08 AO2 filt time
0.000 ... 30.000 s
15.09 AO2 out max
-10.000 ... 10.000 V Maximum AO2 output value.
15.10 AO2 out min
-10.000 ... 10.000 V Minimum AO2 output value.
15.11 AO2 src max
-32768.000 ...
32768.000
Description
03.05 SpeedRef ramped
03.06 SpeedRef used (see page 71).
03.14 Torq ref used (see page 71).
04.03 Process act (see page 72).
04.05 Process PID out (see page 72).
Value pointer setting (see
63).
Defines the filtering time constant for analogue output AO2.
See parameter 15.02 AO1 filt
Filter time constant.
Defines the maximum output value for analogue output AO2.
Defines the minimum output value for analogue output AO2.
Defines the real value of the signal (selected by parameter
15.07 AO2 src) that corresponds to the maximum AO2 output
value (defined by parameter
I (V)
AO2
15.09
15.10
15.12
I (V)
AO2
15.09
15.10
15.11
Real signal value corresponding to maximum AO2 output
value.
(see page 71).
Terms and abbreviations
time.
15.09 AO2 out max).
15.11
Signal (real)
selected by par.
15.07
15.12
Signal (real)
selected by par.
15.07
Parameters 111
FbEq
1073742597
1073742598
1073742606
1073742851
1073742853
on page -
1000 = 1 s
1000 = 1 V
1000 = 1 mA
1000 = 1