Analogue Outputs - ABB ACS850 Firmware Manual

108 Parameters
No. Name/Value
14.62 Freq out max src
0 ... 32768
14.63 Freq out min src
0 ... 32768
14.64 Freq out max sca
3 ... 32768 Hz
14.65 Freq out min sca
3 ... 32768 Hz
15

15 Analogue outputs

15.01 AO1 src
Speed rpm
Description
When 14.10 DIO3 conf
value of the signal (selected by parameter
that corresponds to the maximum DIO3 frequency output
value (defined by parameter
f (Hz)
DIO3
14.64
14.65
14.63
f (Hz)
DIO3
14.64
14.65
14.62
Real signal value corresponding to maximum DIO3 output
frequency.
When 14.10 DIO3 conf
value of the signal (selected by parameter
that corresponds to the minimum DIO3 frequency output
value (defined by parameter
Real signal value corresponding to minimum DIO3 output
frequency.
When 14.10 DIO3 conf
maximum DIO3 output frequency.
Maximum DIO3 output frequency.
When 14.10 DIO3 conf
minimum DIO3 output frequency.
Minimum DIO3 output frequency.
Selection and processing of actual signals to be indicated
through the analogue outputs. See section
analog outputs on page
Selects a drive signal to be connected to analogue output
AO1.
01.01 Motor speed rpm
is set to Freq output, defines the real
14.61 Freq out
14.64 Freq out max
14.62
Signal (real)
selected by
par.
14.63
Signal (real)
selected by
par.
is set to Freq output, defines the real
14.61 Freq out
14.65 Freq out min
is set to Freq output, defines the
is set to Freq output, defines the
Programmable
42.
(see page 64).
FbEq
src)
sca).
14.61
14.61
1 = 1
src)
sca).
1 = 1
1 = 1 Hz
1 = 1 Hz
1073742081