Programmable Analog Outputs; Programmable Digital Inputs And Outputs; Programmable Relay Outputs; Programmable Protection Functions - ABB ACS850 Firmware Manual

42 Program features
Settings
Parameter group 13 Analogue inputs

Programmable analog outputs

The drive has one current and one voltage analog output. Each output can be filtered,
inverted and scaled. The number of analog outputs can be increased by using FIO-xx
I/O extensions.
Settings
Parameter group 15 Analogue outputs

Programmable digital inputs and outputs

The drive has six digital inputs and three digital inputs/outputs. One of the digital
inputs/outputs can be used as a frequency input, one as a frequency output.
The number of digital inputs/outputs can be increased by using FIO-xx I/O
extensions.
Settings
Parameter group 14 Digital I/O

Programmable relay outputs

The drive has one relay output. The signal to be indicated by the output can be
selected by a parameter.
Additional relay outputs can be added by using FIO-xx I/O extensions.
Settings
Parameter group 14 Digital I/O

Programmable protection functions

External fault (parameter 30.01)

A source for an external fault signal is selected by this parameter. When the signal is
lost, a fault is generated.

Local control loss detection (parameter 30.03)

The parameter selects how the drive reacts to a control panel or PC tool
communication break.
(page 89).
(page 108).
(page 96).
(page 96).