Emerson E300 Series Design Manual page 412

Safety Product Mechanical
information information installation
N04 Media Card File Type
Mode Open-Loop, RFC-A, RFC-S
Minimum 0
Default
Type 8 Bit Volatile
Display Format Standard
Coding RO, Txt, ND, NC, PT
Value Text
0 None
1 Open-Loop
2 RFC-A
3 RFC-S
4 Not used
5 User Prog
6 Option App
Media Card File Type (N04) shows the file type of the file selected with Media Card File Number (N03) as shown in the table below.
Media Card File Type (N04)
0
1
2
3
4
5
6
N05 Media Card File Version
Mode Open-Loop, RFC-A, RFC-S
Minimum 0
Default
Type 16 Bit Volatile
Display Format Standard
Coding RO, ND, NC, PT
Media Card File Version (N05) shows the version number stored with the file selected with Media Card File Number (N03).
To set a file version number on a NV media card, the number required must be set in Media Card File Required Version (N11) and then the data must
be written to the NV media card. Failure to do this will result in no version number being displayed when selecting the NV media card file number in
Media Card File Number (N03).
N06 Media Card File Checksum
Mode Open-Loop, RFC-A, RFC-S
Minimum -2147483648
Default
Type 32 Bit Volatile
Display Format Standard
Coding RO, ND, NC, PT
Media Card File Checksum (N06) shows the checksum from the file selected with Media Card File Number (N03). If the media file is a Unidrive SP
SMARTCARD file, the checksum is (∑ All bytes except the checksum) modulo 65536. If the file was generated by a Unidrive M, a value of zero will be
displayed.
412
Electrical Getting
User Menu A Commissioning
installation started
File
No file selected
Open-loop mode parameter file
RFC-A mode parameter file
RFC-S mode parameter file
Not used
Onboard user program file
Option module applications file
Advanced
Diagnostics Optimization CT MODBUS RTU Technical Data
Parameters
Maximum 6
Units
Update Rate Background write
Decimal Places 0
Maximum 999
Units
Update Rate Background write
Decimal Places 0
Maximum 2147483647
Units
Update Rate Background write
Decimal Places 0
E300 Design Guide
Issue Number: 1