Emerson E300 Series Design Manual page 20

Safety Product Mechanical
information information installation
Type Color
Moss Green
Automation Moss Green
(Applications)
Black
Table 2-9 Keypad identification
Type Name
KI-Elv Keypad RTC
Keypad
CI-Elv Remote Keypad
Table 2-10 Additional options
Type Name
SD Card Adaptor
Back-up
SMARTCARD
KI-485 Adaptor
Communications
CT USB comms cable
20
Electrical Getting
User Menu A Commissioning
installation started
Name
Machine Control Studio compatible applications processor
MCi 200
2nd processor for running pre-defined and/or customer created application software.
Machine Control Studio compatible applications processor (with Ethernet
communications)
MCi 210
2nd processor for running pre-defined and/or customer created application software
with Ethernet communications.
SyPTPro compatible applications processor (with CTNet)
SI-Applications Plus 2nd processor for running pre-defined and/or customer created application software
with CTNet support (can only be used on Slot 3).
LCD RTC keypad option
Keypad with LCD display and real time clock
LCD Remote keypad option
Keypad with LCD display which can be mounted remotely (KI-485 Adaptor and CT USB comms cable
required)
SD card adaptor
Allows the drive to use an SD card for drive back-up
SMARTCARD
Used for parameter back-up with the drive
485 Comms adaptor
485 Comms adaptor provides 485 communication interface and connection of the remote keypad. This
adaptor supports 115 k Baud, node addresses between 1 to 16 and 8 1 NP M serial mode.
Comms cable
CT USB to RJ485 comms cable for use with KI-485 Adaptor to provide communications interface
Advanced
Diagnostics Optimization CT MODBUS RTU Technical Data
Parameters
Further Details
Further Details
Further Details
E300 Design Guide
Issue Number: 1