Emerson E300 Series Design Manual page 290

Safety Product Mechanical
information information installation
G04 V4 Speed Reference
Mode Open-Loop, RFC-A, RFC-S
Minimum 0
Default 10
Type 16 Bit User Save
Display Format Standard
Coding RW, VM, PT
This is V4 speed reference and is set in mm / s.
Nominal Elevator Speed (E01) defines the maximum limit for this parameter.
G05 V5 Speed Reference
Mode Open-Loop, RFC-A, RFC-S
Minimum 0
Default 100
Type 16 Bit User Save
Display Format Standard
Coding RW, VM
This is V5 speed reference and is set in mm / s.
Nominal Elevator Speed (E01) defines the maximum limit for this parameter.
G06 V6 Speed Reference
Mode Open-Loop, RFC-A, RFC-S
Minimum 0
Default 100
Type 16 Bit User Save
Display Format Standard
Coding RW, VM
This is V6 speed reference and is set in mm / s.
Nominal Elevator Speed (E01) defines the maximum limit for this parameter.
G07 V7 Speed Reference
Mode Open-Loop, RFC-A, RFC-S
Minimum 0
Default 100
Type 16 Bit User Save
Display Format Standard
Coding RW, VM
This is V7 speed reference and is set in mm / s.
Nominal Elevator Speed (E01) defines the maximum limit for this parameter.
G08 V8 Speed Reference
Mode Open-Loop, RFC-A, RFC-S
Minimum 0
Default 100
Type 16 Bit User Save
Display Format Standard
Coding RW, VM
This is V8 speed reference and is set in mm / s.
Nominal Elevator Speed (E01) defines the maximum limit for this parameter.
290
Electrical Getting
User Menu A Commissioning
installation started
Advanced
Diagnostics Optimization CT MODBUS RTU Technical Data
Parameters
Maximum
VM_EX00_NOMINAL_ELEVATOR_SPEED
Units mm / s
Update Rate Background
Decimal Places 0
Maximum
VM_EX00_NOMINAL_ELEVATOR_SPEED
Units mm / s
Update Rate Background
Decimal Places 0
Maximum
VM_EX00_NOMINAL_ELEVATOR_SPEED
Units mm / s
Update Rate Background
Decimal Places 0
Maximum
VM_EX00_NOMINAL_ELEVATOR_SPEED
Units mm / s
Update Rate Background
Decimal Places 0
Maximum
VM_EX00_NOMINAL_ELEVATOR_SPEED
Units mm / s
Update Rate Background
Decimal Places 0
E300 Design Guide
Issue Number: 1