Emerson E300 Series Design Manual page 280

Safety Product Mechanical
information information installation
F50 T7 Analog Input 2 Minimum
Mode Open-Loop, RFC-A, RFC-S
Minimum -100.00
Default -100.00
Type 16 Bit User Save
Display Format Standard
Coding RW
See T5 T6 Analog Input 1 Scaling (F35).
F51 T7 Analog Input 2 Maximum
Mode Open-Loop, RFC-A, RFC-S
Minimum -100.00
Default 100.00
Type 16 Bit User Save
Display Format Standard
Coding RW
See T5 T6 Analog Input 1 Scaling (F35).
F52 T8 Analog Input 3 Mode
Mode Open-Loop, RFC-A, RFC-S
Minimum 6
Default 6
Type 16 Bit User Save
Display Format Standard
Coding RW, TE
Value
6
7
8
9
See T5 T6 Analog Input 1 Mode (F38).
F53 T8 Analog Input 3 Scaling
Mode Open-Loop, RFC-A, RFC-S
Minimum 0.000
Default 1.000
Type 16 Bit User Save
Display Format Standard
Coding RW
The scaling, offset and invert functions for analog input 3 are defined in the same way as for analog input 1. See T5 T6 Analog Input 1 Scaling (F39).
F54 T8 Analog Input 3 Invert
Mode Open-Loop, RFC-A, RFC-S
Minimum 0
Default 0
Type 16 Bit User Save
Display Format Standard
Coding RW
The scaling, offset and invert functions for analog input 3 are defined in the same way as for analog input 1. See T5 T6 Analog Input 1 Scaling (F39).
280
Electrical Getting
User Menu A Commissioning
installation started
Text
Volt Input
Therm Short Cct
Thermistor
Thermistor Input
Advanced
Diagnostics Optimization CT MODBUS RTU Technical Data
Parameters
Maximum 100.00
Units %
Update Rate Background read
Decimal Places 2
Maximum 100.00
Units %
Update Rate Background read
Decimal Places 2
Maximum 9
Units
Update Rate Background read
Decimal Places 0
Maximum 10.000
Units
Update Rate Background read
Decimal Places 2
Maximum 1
Units
Update Rate Background read
Decimal Places 0
E300 Design Guide
Issue Number: 1