Emerson E300 Series Design Manual page 273

Safety Product Mechanical
information information installation
F23
Mode
Minimum
Default
Type
Display Format
Coding
See T24 Digital I/O 01 Source/Destination (F18).
F24
Mode
Minimum
Default
Type
Display Format
Coding
The Digital I/O Output Select parameters allow the I/O to be selected as an input (0) or an output (1). These parameters are only present for digital I/
O that can be used as an input or output.
F25
Mode
Minimum
Default
Type
Display Format
Coding
See T24 Digital I/O 01 Output Select (F24).
F26
Mode
Minimum
Default
Type
Display Format
Coding
See T24 Digital I/O 01 Output Select (F24).
F27
Mode
Minimum
Default
Type
Display Format
Coding
See T24 Digital I/O 01 Source/Destination (F18).
E300 Design Guide
Issue Number: 1
Electrical Getting
User Menu A Commissioning
installation started
T29 Digital Input 06 Destination
Open-Loop, RFC-A, RFC-S
A00
G32
16 Bit User Save
Menu Param Alpha Numeric
RW, DE, PT, BU
T24 Digital I/O 01 Output Select
Open-Loop, RFC-A, RFC-S
0
1
1 Bit User Save
Standard
RW, BU
T25 Digital I/O 02 Output Select
Open-Loop, RFC-A, RFC-S
0
1
1 Bit User Save
Standard
RW, BU
T26 Digital I/O 03 Output Select
Open-Loop, RFC-A, RFC-S
0
0
1 Bit User Save
Standard
RW
T41 T42 Relay Output Source
Open-Loop, RFC-A, RFC-S
A00
L05
16 Bit User Save
Menu Param Alpha Numeric
RW, PT, BU
Advanced
Diagnostics Optimization CT MODBUS RTU Technical Data
Parameters
Maximum AB99
Units
Update Rate Drive reset read
Decimal Places 3
Maximum 1
Units
Update Rate Background read
Decimal Places 0
Maximum 1
Units
Update Rate Background read
Decimal Places 0
Maximum 1
Units
Update Rate Background read
Decimal Places 0
Maximum AB99
Units
Update Rate Drive reset read
Decimal Places 3
273