Declaration Of Conformity (Including 2006 Machinery Directive) - Emerson E300 Series Design Manual

Declaration of Conformity (including 2006 Machinery Directive)

Control Techniques Ltd
The Gro
Newtown
Powys
UK
SY16 3BE
This declaration applies to Elevator E200 and E300 variable speed drive
products, comprising models numbers as shown below:
Eaaa-bbbbbbbbb Valid characters:
aaa 200, 300
03200050A, 03200066A, 03200080A,
03200106A, 03400025A, 03400031A,
03400045A, 03400062A, 03400078A,
03400100A
04200137A, 04200185A, 04400150,
04400172A
05200250A, 05400270A, 05400300A,
05500030A, 05500040A, 05500069A
bbbbbbbbb
06200330A, 06200440A, 06400350A,
06400420A, 06400470A, 06500100A,
06500150A, 06500190A, 06500230A,
06500290A, 06500350A
07200610A, 07200750A, 07200830A,
07400660A, 07400770A, 07401000A,
07500440A, 07500550A, 07600190A,
07600240A, 07600290A, 07600380A,
07600440A, 07600540A
This declaration relates to these products when used as a safety
component of a machine. Only the SAFE TORQUE OFF function
may be used for a safety function of a machine. None of the other
functions of the drive may be used to carry out a safety function.
These products fulfil all the relevant provisions of Directives 2006/42/EC
(The Machinery Directive) and 2004/108/EC (The EMC Directive).
EC type-examination has been carried out by the following notified body:
TÜV Rheinland Industrie Service GmbH
Am Grauen Stein
D-51105 K ln
Ö
Notified Body identification number:
EC type-examination certificate number: 01/205/5270/12
E300 Design Guide
Issue Number: 1
0035
Moteurs Leroy-Somer
Usine des Agriers
Boulevard Marcellin Leroy
CS10015
16915 Angoulême Cedex 9
France
The harmonized standards used are shown below:
Adjustable speed electrical power drive
EN 61800-5-1:2007 systems - safety requirements - electrical,
thermal and energy
Adjustable speed electrical power drive
EN 61800-3:2004 systems. EMC product standard including
specific test methods
Electromagnetic compatibility (EMC). Generic
EN 61000-6-2:2005 standards. Immunity standard for industrial
environments
Electromagnetic compatibility (EMC). Generic
EN 61000-6-4:2007 standards. Emission standard for industrial
environments
Electromagnetic compatibility (EMC), Limits,
EN 61000-3-2:2006 Limits for harmonic current emissions
(equipment input current <16 A per phase)
Electromagnetic compatibility (EMC), Limits,
Limitation of voltage fluctuations and flicker in
EN 61000-3-3:2008
low-voltage supply systems for equipment
with rated current <16 A
Person authorised to compile the technical file:
C Hargis
Chief Engineer
Newtown, Powys. UK
IMPORTANT NOTICE
These drive products are intended to be used with appropriate
motors, sensors, electrical protection components and other
equipment to form complete systems. It is the responsibility of the
installer to ensure that the design of the complete machine,
including its safety-related control system, is carried out in
accordance with the requirements of the Machinery Directive and
any other relevant legislation. The use of a safety-related drive in
itself does not ensure the safety of the machine.
Compliance with safety and EMC regulations depends upon
installing and configuring inverters correctly.
T. Alexander
VP Technology
Date: 19th January 2015
Place: Newtown, Powys. UK
7