Accuracy And Resolution; Acoustic Noise; Overall Dimensions - Emerson E300 Series Design Manual

Safety Product Mechanical
information information installation
12.12

Accuracy and resolution

Speed:
The absolute frequency and speed accuracy depends on the accuracy of the crystal used with the drive microprocessor. The accuracy of the crystal
is 100 ppm, and so the absolute frequency/speed accuracy is 100 ppm (0.01 %) of the reference, when a preset speed is used. If an analog input is
used the absolute accuracy is further limited by the absolute accuracy of the analog input.
The following data applies to the drive only; it does not include the performance of the source of the control signals.
Open loop resolution:
Preset frequency reference: 0.1 Hz
Precision frequency reference: 0.001 Hz
Closed loop resolution
Preset speed reference: 0.1 rpm
Precision speed reference: 0.001 rpm
Analog input 1: 11 bit plus sign
Analog input 2: 11 bit plus sign
Current:
The resolution of the current feedback is 10 bit plus sign.
Accuracy: typical 2 %
worst case 5 %
12.13

Acoustic noise

The heatsink fan generates the majority of the sound pressure level at 1 m produced by the drive. The heatsink fan on size 3 is a variable speed fan. The
drive controls the speed at which the fan runs based on the temperature of the heatsink and the drive's thermal model system.
Table 12-3 gives the sound pressure level at 1 m produced by the drive for the heatsink fan running at the maximum and minimum speeds.
Table 12-3 Acoustic noise data
Max speed
Size
3
4
5
6
7
12.14

Overall dimensions

H Height including surface mounting brackets
W Width
D Projection forward of panel when surface mounted
F Projection forward of panel when through-panel mounted
R Projection rear of panel when through-panel mounted
Table 12-4 Overall drive dimensions
Size
3
4
5
6
7
486
Electrical Getting
User Menu A Commissioning
installation started
Min speed
dBA dBA
35 30
40 35
48 40
H W
382 mm 83 mm
(15.04 in) (3.27 in)
391 mm 124 mm
(15.39 in) (4.88 in)
391 mm 143 mm
(15.39 in) (5.63 in)
391 mm 210 mm
(15.39 in) (8.27 in)
557 mm 270 mm
(21.93 in) (10.63 in)
Advanced
Diagnostics Optimization CT MODBUS RTU
Parameters
Dimension
D
200 mm (7.87 in) 134 mm (5.28 in)
202 mm 135 mm
(7.95 in) (5.32 in)
227 mm 131 mm
(8.94 in) (5.16 in)
279 mm 187 mm
(10.98 in) (7.36 in)
Technical Data
F R
67 mm (2.64 in)
66 mm
(2.59 in)
67 mm (2.64 in)
96 mm
(3.78 in)
92 mm
(3.62 in)
E300 Design Guide
Issue Number: 1