Hitachi HD64465 User Manual page 107

NITR: Interrupt Trigger Mode Register [cont'd]
Bit Description
2 SCDI Interrupt Trigger Mode (SCDIT)
This bit is used to set the trigger mode for SCDI interrupt request.
1: The interrupt request from SCDI is in edge trigger mode.
0: The interrupt request from SCDI is in level trigger mode.
1 USB Interrupt Trigger Mode (USBT)
This bit is used to set the trigger mode for USB interrupt request.
1: The interrupt request from USB is in edge trigger mode.
0: The interrupt request from USB is in level trigger mode.
0 ADC Interrupt Trigger Mode (ADCT)
This bit is used to set the trigger mode for ADC interrupt request.
1: The interrupt request from ADC is in edge trigger mode.
0: The interrupt request from ADC is in level trigger mode.
Rev. 3.0, 03/01, page 88 of 390
Default
0
0
0