Read Contract Totals - Emerson Micro Motion 5700 Configuration And Use Manual

Log files, history files, and service files
March 2019
Totalizer history and configuration files
If you restore the factory configuration or upload a configuration file, totalizer history is not affected.
Totalizer log
================================================================================
Device UID: 22729F1F
Name
================================================================================
Mass Fwd Total
Mass Fwd Inv
Mass Fwd Total
Mass Fwd Inv
Mass Fwd Total
Mass Fwd Inv
Mass Fwd Total
Mass Fwd Inv
Mass Fwd Total
Mass Fwd Inv
...
Note
The totalizer history displays only in English.

Read contract totals

You can read contract totals for the current 24-hour contract period and for the previous 24-hour contract
period. Depending on the configuration of the totalizer history log, you may be able to read contract totals for
earlier periods.
The contract totals are derived from existing inventories. However, they are reset automatically at the
beginning of each contract period. Therefore, the values shown will probably not match the values shown for
the inventories.
Important
You can reset inventories manually, and you can stop and start inventories manually. However, if you do this,
data for the current contract period will not reflect the entire 24-hour period. Data for earlier contract periods
is not affected.
• The contract totals for the current contract period are stored in the Today's Total [1-4] parameters.
The contract totals for the previous contract period are stored in the Yesterday's Total [1-4] parameters.
•
• The contract totals from earlier contract periods can be read in the totalizer history log.
236
Value
61.74707
61.74705
61.74707
61.74705
61.74707
61.74705
61.74707
61.74705
61.74707
61.74705
Device Tag: SUPPLY
Units
grams
grams
grams
grams
grams
grams
grams
grams
grams
grams
Micro Motion Model 5700 Transmitters with Configurable Outputs
Configuration and Use Manual
MMI-20025166
Time Zone: GMT-7.00
9/12/2018 20:00
9/12/2018 20:00
9/12/2018 21:00
9/12/2018 21:00
9/12/2018 22:00
9/12/2018 22:00
9/12/2018 23:00
9/12/2018 23:00
9/13/2018 0:00
9/13/2018 0:00