Commissioning Wizards; Make A Startup Connection To The Transmitter; Set The Transmitter Clock - Emerson Micro Motion 5700 Configuration And Use Manual

Quick start
March 2019
Table 2-1: Status LED and device status
Status LED condition
Solid red
Flashing yellow (1 Hz)

2.3 Commissioning wizards

The transmitter menu includes a Guided Setup to help you move quickly through the most common
configuration parameters. ProLink III also provides a commissioning wizard.
By default, when the transmitter starts up, the Guided Setup menu is offered. You can choose to use it or not.
You can also choose whether or not Guided Setup is displayed automatically.
• To enter Guided Setup upon transmitter startup, choose Yes at the prompt.
• To enter Guided Setup after transmitter startup, choose Menu > Startup Tasks.
To control the automatic display of Guided Setup, choose Menu > Configuration > Guided Setup.
•
For information on the ProLink III commissioning wizard, see the Micro Motion ProLink III User Manual.
As the commissioning wizards are self guided, they are not documented in detail.

2.4 Make a startup connection to the transmitter

For all configuration tools except the display, you must have an active connection to the transmitter to
configure the transmitter.
Procedure
Identify the connection type to use, and follow the instructions for that connection type in the appropriate
appendix.
Communications tool
ProLink III
Field Communicator

2.5 Set the transmitter clock

Display Menu > Configuration > Time/Date/Tag
ProLink III Device Tools > Configuration > Transmitter Clock
Field Communicator Configure > Manual Setup > Clock
10
(continued)
Device status
One or more alerts are active with Alert Severity = Failure.
The Function Check in Progress alert is active.
Connection type to use
HART
HART
Micro Motion Model 5700 Transmitters with Configurable Outputs
Configuration and Use Manual
MMI-20025166
Instructions
Using ProLink III with the transmitter
Using a Field Communicator with the
transmitter