Wire The Printer - Emerson Micro Motion 5700 Configuration And Use Manual

Configure, wire, and use a printer for tickets
March 2019
Table 10-2: Ticket types for special applications
Special applications
Custody transfer application
(OIML)
Custody transfer application
(OIML/batch)
The discrete batch application is
installed and approved.

10.2 Wire the printer

For configurations that will use tickets, wire a printer to the Model 5700.
Procedure
Wire the RS232-RS485 adapter terminals to the Model 5700 terminals.
Converter
K2 ADE
K2
Figure 10-1: Wiring between the K2 terminals to the Model 5700 terminals
A. Transmitter with end-cap removed
Important
For a K2 ADE converter, use terminals 1 and 2 on the converter.
176
(continued)
Standard Batch
X X
Available only if
the discrete
batch
application is
installed
Not a legal
receipt
X
Terminals
• Wire the K2 ADE terminal 1 to Channel E, RS-485B, terminal 10
• Wire the K2 ADE terminal 2 to Channel E, RS-485A, terminal 9
• Wire the K2 terminal 3 to Channel E, RS-485B, terminal 10
• Wire the K2 terminal 4 to Channel E, RS-485A, terminal 9
Micro Motion Model 5700 Transmitters with Configurable Outputs
Configuration and Use Manual
Available tickets
Batch (NTEP) Transfer
(OIML)
X
Legal receipt
X
Legal receipt
MMI-20025166
Batch (OIML)
X
Legal receipt