Access And Use The Display Menus - Emerson Micro Motion 5700 Configuration And Use Manual

Transmitters with configurable outputs
Hide thumbs Also See for Micro Motion 5700:
Table of Contents

Advertisement

Using the transmitter display
March 2019
Table A-1: Status LED and device status
Status LED condition
Solid red
Flashing yellow (1 Hz)
LCD panel
In normal operation, the LCD panel shows the current value of the display variables, and their measurement
units.
Figure A-3: Model 5700 transmitter LCD panel
The LCD panel also provides access to the display menus and alert information. From the display menus, you
can:
View the current configuration and make configuration changes.
Perform procedures such as loop testing and zero verification.
Run batches.
The alert information allows you to see which alerts are active, acknowledge the alerts individually or as a
group, and to see more detailed information for individual alerts.
A.2 Access and use the display menus
The display menus allow you to perform most configuration, administration, and maintenance tasks.
The four optical switches, ⇦⇧⇩⇨, are used to navigate the menus, make selections, and enter data. To
activate an optical switch, hold your thumb or finger over it to block the light.
310
(continued)
Device status
One or more alerts are active with Alert Severity = Failure.
The Function Check in Progress alert is active.
Micro Motion Model 5700 Transmitters with Configurable Outputs
Configuration and Use Manual
MMI-20025166

Advertisement

Table of Contents
loading

Table of Contents