Appendix A Using The Transmitter Display; Components Of The Transmitter Display - Emerson Micro Motion 5700 Configuration And Use Manual

Configuration and Use Manual
MMI-20025166
A Using the transmitter display
This section explains how to use the display. Using the display, you can move through the menus, configure
the application, monitor and control the application, and perform maintenance and diagnostic tasks.
A.1 Components of the transmitter display
The transmitter display includes a status LED, a multi-line LCD panel, two security switches, and four optical
switches.
Figure A-1: Model 5700 transmitter display
Status LED
The status LED indicates the current state of the transmitter.
Figure A-2: Model 5700 transmitter status LED
Table A-1: Status LED and device status
Status LED condition
Solid green
Solid yellow
Configuration and Use Manual
Device status
No alerts are active.
One or more alerts are active with Alert Severity = Out of Specification,
Maintenance Required, or Function Check.
Using the transmitter display
March 2019
309