Read Totalizer And Inventory Values - Emerson Micro Motion 5700 Configuration And Use Manual

Configuration and Use Manual
MMI-20039472
If ⓘ appears:
•
a) Choose Menu → (i) Alert List.
b) Select an alert to view more information about the specific alert or to acknowledge it individually.
c) Choose Acknowledge All Alerts to acknowledge all alerts on the list.
11.2.2 View and acknowledge alerts using ProLink III
You can view a list containing all alerts that are active, or inactive but unacknowledged. From this list, you can
acknowledge individual alerts or choose to acknowledge all alerts at once.
Note
Certain alerts do not clear until the transmitter is rebooted.
Procedure
1. View alerts on the ProLink III main screen under Alerts.
All active or unacknowledged alerts are listed. Take appropriate steps to clear all active alerts.
2. To acknowledge a single alert, check the Ack checkbox for that alert. To acknowledge all alerts at once,
click Ack All.
11.2.3 View alerts using the Field Communicator
You can view a list containing all alerts that are active, or inactive but unacknowledged.
Restriction
You cannot use the Field Communicator to acknowledge alerts. You can only view alerts. To acknowledge
alerts, use the display or make a connection to the transmitter using a different tool.
Procedure
• To view active or unacknowledged alerts, choose Service Tools → Alerts.
All active alerts and unacknowledged alerts are listed. Select an alert to view detailed information.
• To refresh the list, choose Service Tools → Alerts → Refresh Alerts.

11.3 Read totalizer and inventory values

Display Menu → Operations → Totalizers → See Totals
ProLink III Device Tools → Totalizer Control → Totalizers
Device Tools → Totalizer Control → Inventories
Field Communicator Overview → Totalizer Control
Totalizers keep track of the total amount of mass or volume measured by the transmitter since the last
totalizer reset. Inventories keep track of the total amount of mass or volume measured by the transmitter
since the last inventory reset.
Configuration and Use Manual
Transmitter operation
June 2019
161