Emerson Micro Motion 5700 Configuration And Use Manual page 194

Transmitter operation
March 2019
12.4.3 Start, stop, and reset totalizers using the Field
Communicator
You can start and stop each totalizer or inventory independently. You can start and stop all totalizers and
inventories as a group. You can reset each totalizer or inventory independently. You can reset all totalizers as
a group. You can reset all inventories as a group.
When a totalizer or inventory is started, its value increases or decreases depending on the interaction of the
flow direction parameters. It continues tracking flow until it is stopped.
When a totalizer or inventory is reset, its value is set to 0. You can reset a totalizer or inventory while it is
started or while it is stopped.
Procedure
• To start or stop a single totalizer:
a) Choose Overview > Totalizer Control > Totalizers 1-7.
b) Select the totalizer that you want to start or stop.
c) Choose Start or Stop.
• To start or stop a single inventory:
a) Choose Overview > Totalizer Control > Inventories 1-7.
b) Select the inventory that you want to start or stop.
c) Choose Start or Stop.
• To start or stop all totalizers and inventories as a group:
a) Choose Overview > Totalizer Control.
b) Click Start Totalizers or Stop Totalizers.
• To reset a single totalizer:
a) Choose Overview > Totalizer Control > Totalizers 1-7.
b) Select the totalizer that you want to reset.
c) Choose Reset.
• To reset a single totalizer:
a) Choose Overview > Totalizer Control > Inventories 1-7.
b) Select the inventory that you want to reset.
c) Choose Reset.
• To reset all totalizers as a group, choose Overview > Totalizer Control > Reset All Totals.
• To reset all inventories as a group, choose Overview > Totalizer Control > Reset All Inventories.
194 Micro Motion Model 5700 Transmitters with Configurable Outputs
Configuration and Use Manual
MMI-20025166